Ilo Mp Lan Leds; Ilo Mp Led Status Descriptions – Example 1 - HP rp4410 Service Manual

Table 1-4 Power Supply Status LED (continued)
Power LED
(Green)
On
Off
On
On

iLO MP LAN LEDs

NOTE: There are two different iLO MP cards that were installed in this server. They have
different LEDs on them. Both of them are shown below.
One of the iLO MP LAN cards has the amber LED on the left and the green LED on the right. It
is shown in Figure
has two LEDs (LAN link and LAN activity) that signal status and activity.
Figure 1-9 iLO MP LAN LEDs – Example 1
Table 1-5 provides iLO MP LED status descriptions.
Table 1-5 iLO MP LED Status Descriptions – Example 1
LED
100 M amber
100 M amber
10 M green
10 M green
The other iLO MP LAN card has the green LED on the left and the amber LED on the right. Is is
shown in Figure
30 Overview
Predict Fail LED Fail LED (Amber)
(Amber)
Off Off
Off On
Blinking Off
Off Blinking
1-9. The internal iLO MP LAN uses an RJ-45 type connector. This connector
Condition
On
Blinking
On
Blinking
1-10.
Status
PSU dc outputs are on and OK.
Power supply failure.
Predictive failure. The PSU is about to fail because of a poorly
performing fan.
Current limit on 48 VDC output.
Status
Linked at 100 MBs. No activity.
Linked at 100 MBs. Activity present.
Linked at 10 MBs. No activity.
Linked at 10 MBs. Activity present.