System Specifications; System Configuration; Dimensions And Values; Minimum And Maximum Server Configurations - HP rp4410 Service Manual

2 System Specifications

This chapter provides information on the basic system configuration, physical specifications,
and requirements for the HP 9000 rp4410 or rp4440 server.

System Configuration

Table 2-1 lists the minimum and maximum configuration options for the HP 9000 rp4410 and
rp4440 servers.
Table 2-1 Minimum and Maximum Server Configurations
Component
Microprocessors
Memory
HDDs
SCSI
LAN
PCI Slots
Core I/O
DVD
External storage
Power supply

Dimensions and Values

Table 2-2 provides dimensions and values of HP 9000 rp4410 and rp4440 servers.
Table 2-2 Server Dimensions and Values
Dimension
Height
Width
Depth
rp4410
One or two dual-core processor modules, each
containing two PA RISC 800 MHz/1.5 MB
cache or 1 GHz/1.5 MB cache. The CPUs are
available with 32 MB or 64 MB L2 cache. A
single CPU or all installed CPUs can be
activated.
Supports up to 16 Double Data Rate (DDR)
registered ECC memory, in PC2100 DIMMs.
Up to 32 DDR DIMMs can be optionally used.
Maximum memory is 128 GB. Supported DDR
DIMM sizes: 256 MB and 512 MB, 1 GB, 2 GB,
and 4 GB.
2-36 GB, 15K RPM Ultra320 SCSI hot-plug
disks or 2-73 GB, 15K RPM Ultra320 SCSI
hot-plug disks or 2-146 GB, 10K RPM Ultra320
SCSI hot-plug disks.
Integrated Ultra-3 SCSI dual channel
controller; 80 Mb/s transfer rate with two
external 68-pin connectors.
PCI GB Fast Ethernet controller.
Two dedicated for LAN and SCSI; four 64-bit
PCI-X slots, 66 MHz, 3.3V slots; and two 64-bit
PCI-X slots, 133 MHz, 3.3V slots.
Three serial ports, two USB ports, integrated
RJ-45 LAN.
DVD-R/CD drive, IDE interface, 48x speed.
Two external SCSI ports.
One power supply standard. A second power
supply (optional) for 1+1 configuration.
rp4440
Up to four dual-core processor modules, each
containing two PA RISC 800 MHz/1.5 MB
cache or 1 GHz/1.5 MB cache. The CPUs are
available with 32 MB or 64 MB L2 cache. All
installed CPUs (2, 4, 6, or 8) are activated.
Supports up to 16 Double Data Rate (DDR)
registered ECC memory, in PC2100 DIMMs.
Up to 32 DDR DIMMs can be optionally used.
Maximum memory is 128 GB. Supported DDR
DIMM sizes: 256 MB, 512 MB, 1 GB, 2 GB, and
4 GB.
2-36 GB, 15K RPM Ultra320 SCSI hot-plug
disks or 2-73 GB, 15K RPM Ultra320 SCSI
hot-plug disks or 2-146 GB, 10K RPM Ultra320
SCSI hot-plug disks.
Integrated Ultra-3 SCSI dual channel
controller; 80 Mb/s transfer rate with two
external 68-pin connectors.
PCI GB Fast Ethernet controller.
Two dedicated for LAN and SCSI; four 64-bit
PCI-X slots, 66 MHz, 3.3V slots; and two 64-bit
PCI-X slots, 133 MHz, 3.3V slots.
Three serial ports, two USB ports, integrated
RJ-45 LAN.
DVD-R/CD drive, IDE interface, 48x speed.
Two external SCSI ports.
One power supply standard. A second power
supply (optional) for 1+1 configuration.
Value
6.8 in (17.3 cm)
19 in (48.2 cm)
27.2 in (69.0 cm)
System Configuration 43