Booting Hp-Ux In Single-User Mode; Booting Hp-Ux In Lvm Maintenance Mode; Shutting Down Hp-Ux - HP rp4410 Service Manual

2. From the COnfiguration Menu > prompt, enter pa pri xx/xx/xx.
3. From the COnfiguration Menu> prompt, enter ma.
To boot HP-UX once you have set the primary path, follow these steps:
1. At the BCH Main Menu, enter Menu> bo pri. The following prompt displays:
Do you wish to stop at the ISL prompt prior to booting (y/n)?
2. Enter n.
NOTE: If the server fails to boot, you may be required to boot from a DVD that contains the
operating system and other necessary software.

Booting HP-UX in Single-User Mode

To boot to HP-UX in single-user mode, follow these steps:
1. At the BCH Main Menu, enter command or menu> bo pri. The following message displays:
Interact with IPL (Y, N, or Cancel)?>
2. To interact with IPL, answer y.
3. At the ISL> prompt, type hpux -is.

Booting HP-UX in LVM Maintenance Mode

To boot to HP-UX in LVM maintenance mode, follow these steps:
1. At the BCH Main Menu, enter command or menu> bo pri. The following message displays:
Interact with IPL (Y, N, or Cancel)?>
2. To interact with IPL, answer y.
3. At the ISL> prompt, type hpux -lm.

Shutting Down HP-UX

To shut down HP-UX running on a system, use the shutdown command. You have the following
options when shutting down HP-UX:
• To shut down and reboot an HP-UX system, use the shutdown -r command.
• To shut down and halt (power off) an HP-UX system, use the shutdown -h command.
For details, see the shutdown(1M) manpage and follow these steps:
1. To shut down the HP-UX operating system, issue the shutdown command from the HP-UX
command line.
2. Log in to HP-UX running on the system that you want to shut down.
You should log in to the iLO MP for the server and use the Console menu to access the
system console. Accessing the console through the iLO MP enables you to maintain console
access to the server after HP-UX has shut down.
3. Issue the shutdown command with the appropriate command-line options.
The command-line options you specify dictate the way in which HP-UX shuts down, and
whether the server is rebooted.
Use the following list to choose an HP-UX shutdown option for the server:
• To shut down HP-UX and halt (power off) the server, issue the shutdown -h command.
To reboot a halted server you must power on the server using the PC command at the
iLO MP Command menu.
• To shut down HP-UX and reboot the server, issue the shutdown -r command.
126 Booting the Operating System