External Core I/O; Processors; Memory; Cooling - HP rp4410 Service Manual

• One internal Integrated Drive Electronics (IDE) connector for a slimline optical device (CD
and DVD).
• No floppy connector.
• Optional dual channel U320 RAID controller, two internal 68-pin connectors, two 68-pin
external connectors (replaces SCSI interface).

External Core I/O

The following is supported on the HP 9000 rp4410 and rp4440 servers:
• Three external serial ports.
• Two external USB ports.
• Two SCSI U320 or U160 68-pin connectors (U160 for PA8800 only).
• One or two 10/100/1000Base-T ethernet LAN connectors for copper cable.
• Two USB 2.0 ports.
• Three DB-9 ports (console, UPS, and modem).
• Optional dual channel U320 RAID controller, two 68-pin external connectors (replaces SCSI
interface).

Processors

The following is supported on the HP 9000 rp4410 and rp4440 servers:
• 800 MHz/1.5 GB cache or 1 GHz/1.5 GB cache per CPU.
• Both processors are available with 32 MB or 64 MB L2 cache per dual processor module.
• HP 9000 rp4410 server can have one processor or both processors of a single dual processor
module enabled, or two processors enabled in each of two dual processor modules.
• HP 9000 rp4440 server can be 1P/2C, 2P/2C, 3P/2C, or 4P/2C.

Memory

The following is supported on the HP 9000 rp4410 and rp4440 servers:
• 16 DIMM slots on standard memory extender board.
• 32 DIMM slots on optional memory extender board.
• Maximum memory size of 128 GB (4 GB DIMMs on 32-slot memory extender board).
• Supports up to 32 Double Data Rate (DDR) registered ECC memory, in PC2100 DIMMs.
• Supported DDR DIMM sizes:
— 128 MB, 256 MB, 512 MB, 1 GB, 2 GB, and 4 GB
— Standard 184 pins 2.5V DDR266, CL2, registered, ECC
• 133 MHz memory bus frequency, 266 MTransfers/s data, 8.5 GB/s peak data bandwidth.
• DIMMs loaded by quads enable interleaved mode and chip spare.
• Requires that DIMMs within each group of four (quad) be identical.

Cooling

Six cooling fans with N+1 redundancy.

Power Supply Unit

The following is supported on the HP 9000 rp4410 and rp4440 servers:
• One 1200 W hot-swappable power supply.
• Optional second 1200 W hot-swappable power supply for N+1 redundancy.
Detailed Server Description 53