Installing The Scsi Cable B To The Scsi Backplane - HP rp4410 Service Manual
User service guide, fifth edition - hp 9000 rp4410/4440
Hide thumbs
Also See for rp4410:
- Installation manual (103 pages) ,
- Manual (51 pages) ,
- Programmer's manual (109 pages)
Table of Contents
Advertisement
4.
Install the SCSI Cable B on the SCSI backplane.
a.
Release the SCSI Cable B from its stowed position within the chassis.
b.
Plug the SCSI Cable B connector into the SCSI connector located on the backplane next
to the duplex board installed in the previous step.
Figure 3-38 Installing the SCSI Cable B to the SCSI Backplane
100
Installing the System
(Figure
3-38)
Advertisement
Table of Contents
Troubleshooting
