DIsplay
HElp [<command>]
RESET
MAin
----
Configuration Menu: Enter command >
The configuration default command sets the following values:
Primary boot path:
Alternate boot path:
Console path:
Keyboard path:
Autoboot:
Autosearch:
Autostart:
BootTimer
Information Menu
The INformation menu commands enable you to view information about the configuration
and state of the system.
Main Menu: Enter command or menu > in
---- Information Menu --------------------------------------------------------
Command
-------
ALL
BootINfo
CAche
ChipRevisions
COprocessor
FwrVersion
* IO
LanAddress
MEmory
** PRocessor
*** WArnings
*** IORevisions
BOot [PRI|ALT|<path>]
DIsplay
HElp [<command>]
RESET
MAin
----
Information Menu: Enter command >
* The PCI device information displayed includes description, path, vendor ID, device ID, slot
number, and bus number.
** The PRocessor command displays the system model string.
***Warnings displayed are as follows:
WARNING: Too many CPUS for a rp4410 system. System will not boot.
WARNING: A fatal error has occurred-system cannot boot. Review warning messages in the
Service Menu
The SERvice menu commands are used by service personnel to view information about the
system for the purpose of system service operations.
Main Menu: Enter command or menu > ser
---- Service Menu ------------------------------------------------------------
Command
-------
CLEARPIM
238
Utilities
0/0/1/0.0
0/0/2/0
0/0/1/0.0
0/0/4/0.0
ON
ON
OFF
0
information menu.
Redisplay the current menu
Display help for specified command
Restart the system
Return to Main Menu
Description
-----------
Display all system information
Display boot-related information
Display cache information
Display revisions of major VLSI
Display coprocessor information
Display firmware version
Display I/O interface information
Display Core LAN station address
Display memory information
Display processor information
Display selftest warning messages
Display selftest warning messages
Boot from specified path
Redisplay the current menu
Display help for specified command
Restart the system
Return to Main Menu
Description
-----------
Clear (zero) the contents of PIM