Policy Binding; Managing Qos Statistics; Viewing Policer Statistics - Cisco SF500-24 Administration Manual

Configuring Quality of Service

Managing QoS Statistics

STEP 1
STEP 2
STEP 3
STEP 4
Managing QoS Statistics
Cisco 500 Series Stackable Managed Switch Administration Guide

Policy Binding

The Policy Binding page shows which policy profile is bound and to which port.
When a policy profile is bound to a specific port, it is active on that port. Only one
policy profile can be configured on a single port, but a single policy can be bound
to more than one port.
When a policy is bound to a port, it filters and applies QoS to ingress traffic that
belongs to the flows defined in the policy. The policy does not apply to traffic
egress to the same port.
To edit a policy, it must first be removed (unbound) from all those ports to which it
is bound.
To define policy binding:
Click Quality of Service > QoS Advanced Mode > Policy Binding. The Policy
Binding page is displayed.
Select a Policy Name.
Select the Interface Type assigned to the policy.
Click Apply. The QoS policy binding is defined, and the Running Configuration file
is updated.
From this page you can manage the Single Policer, Aggregated Policer, and view
queues statistics.

Viewing Policer Statistics

A Single Policer is bound to a class map from a single policy. An Aggregate Policer
is bound to one or more class maps from one or more policies.
21
401