AT&T MERLIN LEGEND Installation & Maintenance Manual page 548

Adapters, Accessories, and Applications
Hardware Requirements
A typical CAS system consists of the following equipment:
An approved AT&T MS-DOS-based PC with the following
configuration:
640K RAM
Hard disk drive with at least 3 Mbytes of available space
for the application software
parallel printer output
serial SMDR input
132- or 80-column parallel printer
D8W modular cord and 355AF adapter connecting the SMDR
port on the communications system to the COM1 serial port
on the PC
MS-DOS system disk version 3.3 or later
CAS software (CAS/H, CAS Plus)
Installation
CAS can be installed by using the instructions supplied with the
product. Highlights of these instructions areas follows:
1.
Set up the equipment and identify the PC and MS-DOS
software needed for CAS.
2.
Complete the worksheets. Be sure the four CAS worksheets
show all information you need on telephone lines and
extensions, calling patterns and processing options, and
departments and personnel.
3. Install the software. Load and test MS-DOS, version 3.3 or
later, and the CAS application.
4. Enter the worksheet information. Use the planning worksheets
to adjust the software to meet the needs of the customer.
Applications 6-13