AT&T MERLIN LEGEND Installation & Maintenance Manual page 265

Programming Procedures
Step
2. Continued
To assign QCC
operator position
To delete QCC
operator positions
3. Using system
programming console that
does not have a DSS
attached or when
programming with SPM
To identify QCC
operator position to
assign or delete
To view currently
assigned operator
positions
Console
Press each
position's DSS
button to turn
red LED on.
Go to step 6
Press each
position's DSS
button to make
red LED flash.
Go to step 6
Dial extension,
∗ + slot and
port, or # +
logical ID
Inspct
then
Exit
Positions
Queued Call
Return to step 2 Return to step 2
System Operator positions 4-23
PC
Type extension,
∗ + slot and
port, or # +
logical ID
PgDn
then
F 5
F1
F2