AT&T MERLIN LEGEND Installation & Maintenance Manual page 683

System Technician's Run Sheet
The following explains the information you enter in the columns
on the System Technician's Run Sheet. The number in the
Logical ID column refers to the number of the station jack in the
control unit.
1. On the first line of the "Type" column, enter the type of device
(such as an MLX-20L telephone) connected to the station
jack. On the second line, enter any attached adjuncts (such
as an answering machine).
In the "Wire No." column, enter the number of the wire as
2.
indicated by the label on the wire.
In the "Old Ext. No." column, if the wire run is being changed,
3.
enter the extension number of the old station. If you are
working with a new installation, leave this space blank.
4. In the "New Ext. No." column, enter the extension number of
the station. This includes new installations.
In the "Miscellaneous" column, enter any information
5.
particular to that station.
6. In the "Person, Location, or Function" column, enter the name
of the person at, the location of, or the function of (such as fax
machine) the station.
System Technician's Run Sheet L-3