AT&T MERLIN LEGEND Installation & Maintenance Manual page 278

Programming Procedures
Step
2. Assign QCC queue
priority level (1-7)
3. Save entry
4. Select specific trunks
associated with the 20 line
buttons on console or
SPM screen
For logical IDs 1–20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61-80
5. Assign or remove queue
priority shown on line 1
To assign queue
priority to trunk
To remove queue
priority from trunk
Note: An alternate method for steps 4 and 5 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number,
logical ID, or slot and port no.), and select Enter (F10) or Next
(F9) to assign queue priority shown on line 1, or select Delete
(F8) to delete queue priority shown on line 1.
Lines and Trunks
4-36
Console
Dial priority
level: [n]
Enter
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Press line
button for each
trunk to turn
green LED on
Press line
button for each
trunk to turn
green LED off
PC
Type priority
level: [n]
F10
F 1
F 2
F 3
F 4
Press function
key for each
trunk to make
letter "G"
appear on
screen
Press function
key for each
trunk to erase
letter "G"