AT&T MERLIN LEGEND Installation & Maintenance Manual page 274

Programming Procedures
Step
2. Select specific lines/
trunks associated with the
20 line buttons on the
console or SPM screen
For logical IDs 1-20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61-80
3. Specify toll prefix
requirement for long
distance calls
To specify toll prefix is
required
To specify toll prefix is
not required
Note: An alternate method for steps 2 and 3 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number,
logical ID, or slot and port no.), and select Enter (F10) to specify
a toll prefix is required, or select Delete (F8) to specify a toll
prefix is not required.
4. Exit
Lines and Trunks
4-32
PC
Console
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Press function
Press line
button for each key for each
line/trunk to turn line/trunk to
green LED on make letter "G"
appear on
screen
Press line Press function
button for each key for each
line/trunk to turn line/trunk to
green LED off erase letter "G"
E x i t
E x i t
F1
F2
F3
F4
F5
F5