AT&T MERLIN LEGEND Installation & Maintenance Manual page 359

Programming Procedures
Step
2. If no change to number of Go to step 4
before transfer
rings
To change number of
rings before transfer,
display Transfer Retn
Interval screen
3. To erase current setting,
specifv that calls are not
transferred to the backup
position and save entry
To set number of rings
(1-9) before calls are
transferred to the backup
position and save entry
4. If VMS/AA equipment is
generic or no change to
touch-tone duration
If VMS/AA equipment is
integrated, to change
current setting for touch-
tone duration, display
Touch-Tone Duration
screen
5. Erase current setting,
enter new setting (50–
200ms, in multiples of 25),
and save entry
Console PC
Go to step 4
TransferRtn F1
Drop Alt+P
Dial 0 Type 0
F10
Enter
Dial number of Type number of
rings: [n] rings: [n]
F10
Enter
Go to step 6 Go to step 6
F2
TT Duration
Drop Alt+P
Dial number of Type number of
milliseconds:
milliseconds:
[nnn] [nnn]
F10
Enter
Auxiliary Equipment
4-117