Programming Procedures - AT&T MERLIN LEGEND Installation & Maintenance Manual

Programming Procedures

Remote System Programming
To program with a PC with SPM from a remote location, place a
data call using the instructions provided with the modem.
1. You can establish the data connection with the built-in
modem in one of the following ways:
Call the system on a Remote Access line, enter the barrier
code, and dial the code for the internal modem (∗10)
Call the system on a regular line and ask the system
operator to transfer you to the internal modem
Call the remote location (such as the National Service
Assistance Center) from the system and then transfer the
call to the internal modem
2. When a connection is made with the system modem, use the
following instructions to enter and exit system programming.
4-2 System Programming