AT&T MERLIN LEGEND Installation & Maintenance Manual page 296

Programming Procedures
Step
3. Identify tie trunk and save
entry
If programming more than
one tie trunk, enter lowest
trunk number.
4. Specify tie trunk type
For wink type
For delay type
For immediate type
For automatic type
5. Save choice and either
program another tie trunk
or exit
To save choice and
specify type for
another tie trunk:
If next tie trunk number
is sequential
If next tie trunk number
is not sequential
To save choice and
exit when all entries
are complete
4-54 Tie Trunks
Console
Dial trunk no.
(801-880), ∗ + (801-880), ∗ +
slot and port, or
# + logical ID
Enter
Wink
Delay
Immed
Auto
Next
Repeat step 4
Enter
Repeat
steps 2–5
Enter
Exit
Exit
PC
Type trunk no.
slot and port, or
# + logical ID
F 1 0
F1
F2
F 3
F 4
F 1
Repeat step 4
F10
Repeat
steps 2–5
F10
F 5
F 5