AT&T MERLIN LEGEND Installation & Maintenance Manual page 267

Programming Procedures
Step
2. Assignor delete DLC
operator positions using
system programming
console with a DSS
attached
If system programming
console does not have a
DSS attached; or if
programming with SPM,
go to step 3.
To assign DLC
operator position
To delete DLC
operator positions
3. Using system program-
ming console that does
not have a DSS attached
or when programming
with SPM
To identify DLC
operator position to
assign or delete
Continued
Console
Press each
position's DSS
button to turn
red LED on.
Go to step 6
Press DSS
button to make
red LED flash.
Go to step 6
Dial extension,
∗
+ slot and
port, or # +
logical ID
System Operator Positions
PC
Type extension,
∗
+ slot and
port, or # +
logical ID
4-25