Co Network Interface Codes - AT&T MERLIN LEGEND Installation & Maintenance Manual

Hide thumbs Also See for MERLIN LEGEND:

Table of Contents

Installation

Table 3-33 CO Network Interface Codes

* The preferred network interface is the RJ48X. With the RJ48X interface, if no

connection is provided by the customer's equipment, the T1 facility's receive

pair is looped back to the transmit pair. This simplifies troubleshooting the T1

In most installations, the network interface is connected through

a cross-connect field to the CU. However, for systems with fewer

than 24 stations, the line/trunk wires can be directly connected to

Note: When constructing wiring fields between the network

interface and the CU, you must order hardware as individual

parts. Do not use Interconnect Wiring or SYSTIMAX kits.

3-80 System Wiring

Federal Interface

Code for Facility

RJ11C, RJ14C

RJ11C, RJ14C,

RJ11C, RJ14C,

Show Quick Links

Table of Contents

Troubleshooting

Do you have a question about the MERLIN LEGEND and is the answer not in the manual?