AT&T MERLIN LEGEND Installation & Maintenance Manual page 340

Programming Procedures
Step
4. Assign or remove
lines/trunks or pools
To assign a line/trunk
line button to
t e l e p h o n e
To remove a line/trunk
button from telephone
To assign a pool
button
To remove a pool
button
Note: An alternate method for steps 3 and 4 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number,
logical ID, or slot and port no.), and select Enter (F10) to assign
the line/trunk or pool to the telephone, or select Delete (F8) to
remove the Iine/trunk or pool assignment from the telephone.
5. Exit
4-98 Telephones
PC
Console
Press line
button for each
Iine/trunk to turn
green LED on
appear on
screen
Press line
button for each
line/trunk to turn
green LED off erase letter "G"
Press line
button for any
trunk in pool trunk in pml
until both red
and green
LEDs are on
screen
Press line
button for any
trunk in pool to trunk in pool to
turn green LED
(letter "R"
off (red LED
remains on)
F 5
E x i t
F 5
E x i t
Press function
key for each
line/trunk to
make letter "G"
Press function
key for each
line/trunk to
Press function
key for any
until both letters
"R" and "G"
appear on
Press function
key for any
erase letter "G"
remains on
screen)