AT&T MERLIN LEGEND Installation & Maintenance Manual page 270

Programming Procedures
Step
4. If All Ground or All Loop
was selected
If Ground-Start or
Loop-Start was
selected, identify port
number on 400, 408,
(ports 1-4) or 800
(ports 1-8) module
that has ground-start
or loop-start trunks
connected
If you are
programming more
than one sequentially
numbered port with the
same type, enter
lowest port number.
5. Save entry and either
program more ports or
return to Lines and Trunks
menu
To save entry and
assign trunk type
shown on line 1 to
another port number:
If next port number is
sequential
If next port number is
not sequential
Continued
Lines and Trunks
4-28
Console
Go to step 6
Dial port
number: [n]
Next
Repeat step 4
Enter
E x i t
LS/GS/DS1
Repeat
steps 2–5
PC
Go to step 6
Dial port
number: [n]
F 9
Repeat step 4
F10
F5
F1
Repeat
steps 2–5