AT&T MERLIN LEGEND Installation & Maintenance Manual page 275

Programming Procedures
Hold Disconnect Interval
Step
1. Display Hold Disconnect
screen
2. Select specific
lines/trunks associated
with the 20 line buttons on
console or SPM screen
For logical IDs 1–20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61–80
3. Assign Hold Disconnect
Interval
For long Hold
Disconnect interval
For short Hold
Disconnect interval
Note: An alternate method for steps 2 and 3 is to select Entry
Mode (F6), identify the line/trunk (dial or type line/trunk number,
logical ID, or slot and port no.), and select Enter (F10) to assign
a long hold disconnect, or select Delete (F8) to assign a short
hold disconnect.
4-20 System Renumbering
Console
LinesTrunks
More
Hold Dscnct
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Press line
button for each key for each
line/trunk to turn line/trunk to
green LED on
Press line
button for each key for each
line/trunk to turn line/trunk to
green LED off
PC
F 4
PgUp
F 1
F 1
F 2
F 3
F 4
Press function
make letter "G"
appear on
screen
Press function
erase letter "G"