AT&T MERLIN LEGEND Installation & Maintenance Manual page 494

Maintenance and Troubleshooting
Busy-Out Slot
Busy-Out FAILED
Exit
Demand Tests
Demand tests let you pinpoint module problems.
Note: Before running any tests on the processor module, back
up the system translations by using the PC with SPM (see "Back
Up System Programming" in Chapter 4).
After you run a demand test on a module, you must restore the
module. See "Restore" later in this chapter.
Module Demand Test. Request this demand test to find out if
the module is functioning properly.
Note: A module must be busied-out
run.
Slot xx:
Make a selection
Status
Busy-Out
Restore
Exit
Demand Test Slot xx:
Make a selection
Note: Busy out port first
Go
Repeat
Exit
5-16 Maintenance
XX:
Demand Test
Reset
This screen appears when
busy-out fails.
before a demand test is
Select "Demand Test" from
the Slot menu.
Choose "Go" to run a test
once; choose "Repeat" to
repeat a test continuously.