AT&T MERLIN LEGEND Installation & Maintenance Manual page 300

Programming Procedures
Tie Trunk Dial Tone
Step
1. Display Tie Lines screen
and select Dial Tone
2. Select the specific tie
trunks associated with the
20 line buttons on the
console or SPM screen
For logical IDs 1–20
For logical IDs 21–40
For logical IDs 41–60
For logical IDs 61–80
3. Specify dial tone
For remote dial tone
For local dial tone
Note: An alternate method for
Mode (F6), identify the tie trunk (dial or type trunk number,
logical ID, or slot and port no.), and select Enter (F10) to assign
remote dial tone, or select Delete (F8) to assign local dial tone.
4-58 Tie Trunks
Console
LinesTrunks
TIE Lines
Dialtone
Lines 01-20
Lines 21-40
Lines 41-60
Lines 61-80
Press the
button for each
Iineltrunk to turn each line/trunk
green LED on
Press the
button for each function key for
line/trunk to turn each line/trunk
green LED off
steps 2 and 3 is to select Entry
PC
F4
F2
F8
F1
F2
F3
F4
Press the
function key for
to make letter
"G" appear on
screen
Press the
to erase letter
"G"