From A Different Device; Create Disk Arrays; Install The 3Ware Driver - 3Ware 7000-2 - Escalade RAID Controller User Manual

Installing the ATA RAID controller on
systems that boot from a different device
Materials required:
• 3ware CD-ROM
(You will be required to create a 3ware Windows Driver Installa-
tion Diskette from the files located on the 3ware CD-ROM.
Please refer to the "Readme.txt" file on the 3ware CD-ROM for
directions.)

Create disk arrays

Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters.

Install the 3ware driver

As a Plug and Play device, Windows 2000 or XP recognizes the
Escalade ATA RAID Controller and brings up the Found New
Hardware Wizard which guides you in installing the 3ware driver
(see Figure 37). Continue to the Install/Upgrade 3ware driver sec-
tion.
www.3ware.com
Windows® 2000 or Windows XP Installation
105