3Ware 7000-2 - Escalade RAID Controller User Manual page 152

3ware Escalade ATA RAID Controller User Guide
Note:
connections to certain ports including port-1080. To
override this on a per-port basis, the Netscape release
notes recommend to add a comma-separated list of ports
to default/all.js (in your Netscape installation directory).
For example, to unblock port 1080, use the following
line:
pref("network.security.ports.banned.override", "1080")
If you are using SuSE 7.3 Linux, this file is located at:
/opt/defaults/netscape6/defaults/pref/all.js
Disk arrays and independent disks are listed on the 3DM Home dis-
play. Disks that are members of an array are indented and listed
below their parent array. The type and size of the disks or arrays are
listed as well as status of each array, as shown in Figure 49. For
arrays undergoing rebuilds, the rebuild status for each drive and
port is displayed.
152
For security reasons, Netscape does not allow
www.3ware.com