Installing The Ata Raid Controller On Systems That Boot; Install The 3Ware Driver; From A Different Device; Create Disk Arrays - 3Ware 7000-2 - Escalade RAID Controller User Manual

Installing the ATA RAID controller on
systems that boot from a different device
Materials required:
• 3ware CD-ROM
(You will be required to create a 3ware Linux Driver Installation
Diskette from the files located on the 3ware CD-ROM. Please
refer to the "Readme.txt" file on the 3ware CD-ROM for direc-
tions.)

Create disk arrays

Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters.

Install the 3ware driver

Note:
(i.e., 2.4.2-2 smp) Check 3ware's website for supported
versions.
Note:
installing (i.e. rh73, rh72, etc.). Check 3ware's website for
supported versions.
www.3ware.com
***kernel string*** refers to the kernel version
*** refers to the Red Hat Linux version you are
Linux Installation
127