Adding Drives To An Existing Ata Raid Controller; Boot The Machine - 3Ware 7000-2 - Escalade RAID Controller User Manual

Adding drives to an existing ATA RAID
controller
To add new drives to an existing disk array, refer to the 3ware
Hardware Installation and 3ware Disk Array Configuration Utility
chapters.

Boot the machine

1 Log in as system administrator.
2 Partition and format any new disk array or independent disk
using Disk Administrator in the remaining steps:
a Choose Programs from the Start menu.
b Choose Administrative Tools from the Programs menu.
c Choose Disk Administrator from the Administrative Tools
menu.
www.3ware.com
Windows NT®4.0 Installation
69