Figure 37. Found New Hardware Wizard; Reboot The Machine - 3Ware 7000-2 - Escalade RAID Controller User Manual

3ware Escalade ATA RAID Controller User Guide

Figure 37. Found New Hardware Wizard

Reboot the machine

Log in as system administrator when you reboot the system. You
should see a brief splash screen, followed immediately by an
"Installation Complete" notification. Continue with the following
steps to make any new disk arrays or independent disks accessible
to Windows 2000 or XP.
1 Remove the driver diskette, then select Yes to restart the system.
The system may not boot if you don't remove the diskette.
2 Partition and format the new arrays or disks using Disk Admin-
istrator:
a Choose Administrative Tools from the Start menu.
b Choose Computer Management from the Administrative
Tools menu.
106 www.3ware.com