3Ware 7000-2 - Escalade RAID Controller User Manual page 130

3ware Escalade ATA RAID Controller User Guide
Case 2: Your system runs an SMP system (multi-processor).
1 Type the following lines:
mount –t msdos /dev/fd0 /mnt/
2 For Red Hat 2.4 kernels, type:
cp /mnt/***/3w-xxxx.smp /lib/modules/
***kernel string***/kernel/drivers/scsi/
3w-xxxx.o
3 For Red Hat 7.2 and newer, add the following line to
/etc/modules.conf:
alias scsi_hostadapter 3w-xxxx
4 Run mkinitrd by entering the following:
/sbin/mkinitrd -v /boot/initrd-xxx xxxx
Note:
sion string. The second argument (xxxx) for initrd is the /
lib/modules directory to copy the 3w-xxxx driver from.
SMP systems will have a uniprocessor kernel installed and
will require running mkinitrd for the uniprocessor kernel
to enable loading a driver at boot time.
130
The first argument (xxx) for initrd is the kernel ver-
www.3ware.com