Figure 22. Rebuild Confirmation Display - 3Ware 7000-2 - Escalade RAID Controller User Manual

3ware Escalade ATA RAID Controller User Guide
10 Press F8 to rebuild. The rebuild confirmation screen will be dis-
played (see Figure 22).
Creating or destroying arrays will destroy all existing data
on their member disk drives. Using a drive for a rebuild will
overwrite data on that drive.
Data on the following drives will be destroyed.
Update configuration and exit? [Y/N]
Restore Initial Values
F6

Figure 22. Rebuild Confirmation Display

11 Enter Y to update configurations and exit.
Auto rebuild of a mirrored or RAID 5 array
If a hot spare is specified and the mirrored or RAID 5 array
degrades, an event notification is generated and the hot spare
dynamically replaces the failed drive in the array without user inter-
vention. Rebuild will automatically be launched as a background
process and an event notification will notify the user when the
rebuild process is complete.
64
3 w a r e D i s k A r r a y C o n f i g u r a t i o n
Port 3 - QUANTUM FIREBALLP LM30
Esc
Cancel F8
Done
www.3ware.com