Accton Technology VS4512DC Management Manual page 71

- 10full - Supports 10 Mbps full-duplex operation
- 100half - Supports 100 Mbps half-duplex operation
- 100full - Supports 100 Mbps full-duplex operation
- 1000full - Supports 1000 Mbps full-duplex operation
- Sym - Transmits and receives pause frames for flow control
- FC - Supports flow control
•
Broadcast storm
• Broadcast storm limit – Shows the broadcast storm threshold. (500 - 262143
packets per second)
•
Flow control
• LACP – Shows if LACP is enabled or disabled.
• Port Security – Shows if port security is enabled or disabled.
• Max MAC count – Shows the maximum number of MAC address that can be
learned by a port. (0 - 20 addresses)
• Port security action – Shows the response to take when a security violation is
detected. (none, shutdown, trap, trap-and-shutdown)
• Combo forced mode – Shows the forced/preferred port type to use for
combination ports 21-24. (copper forced, copper preferred auto, SFP forced, SFP
preferred auto)
Current status:
• – Indicates if the link is up or down.
Link Status
• Operation speed-duplex – Shows the current speed and duplex mode.
• Port Operation Status – Indicates if the link is Up or Down.
•
Flow control type
(IEEE 802.3x, Back-Pressure or none)
– Shows if broadcast storm control is enabled or disabled.
– Shows if flow control is enabled or disabled.
– Indicates the type of flow control currently in use.
Port Configuration
3-41