Accton Technology VS4512DC Management Manual page 120

Configuring the Switch
Web – Click VLAN, 802.1Q VLAN, Current Table. Select any ID from the scroll-down
list.
Command Attributes (CLI)
• VLAN – ID of configured VLAN (1-4094, no leading zeroes)
• Type – Shows how this VLAN was added to the switch
- Dynamic: Automatically learned via GVRP*
- Static: Added as a static entry
* Not supported in the current version
• Name – Name of the VLAN (1 to 32 characters)
• Status – Shows if this VLAN is enabled or disabled
- Active: VLAN is operational
- Suspend: VLAN is suspended; i.e., does not pass packets
• Ports / Channel groups – Shows the VLAN interface members
CLI – Current VLAN information can be displayed with the following command.
Console#show vlan id 1
VLAN Type Name
---- ------- ---------------- --------- ----------------------------------------
1 Static
Console#
3-90
Status
DefaultVlan Active Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/ 5
Ports/Channel groups
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth1/10
Eth1/11 Eth1/12 Eth1/13 Eth1/14
4-143