Show Radius-Server; Tacacs+ Client; Tacacs-Server Host - Accton Technology VS4512DC Management Manual

Command Line Interface

show radius-server

This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show radius-server
Server IP address: 10.1.0.1
Communication key with radius server:
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#

TACACS+ Client

Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
Command

tacacs-server host

tacacs-server port
tacacs-server key
show tacacs-server
tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore the
default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
10.11.12.13
Command Mode
Global Configuration
4-64
Function
Specifies the TACACS+ server
Specifies the TACACS+ server network port
Sets the TACACS+ encryption key
Shows the current TACACS+ settings
Mode Page
GC 4-64
GC 4-65
GC 4-65
GC 4-66