Show Mac-Address-Table Aging-Time; Spanning Tree Commands - Accton Technology VS4512DC Management Manual

show mac-address-table aging-time

This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging time: 300 sec.
Console#

Spanning Tree Commands

This section includes commands that configure the Spanning Tree Algorithm (STA)
globally for the switch, and commands that configure STA for the selected interface.
Command
spanning-tree
spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree
path-cost method
spanning-tree
transmission-limit
spanning-tree cost
spanning-tree port-priority
spanning-tree edge-port
spanning-tree portfast
spanning-tree link-type
spanning-tree
protocol-migration
show spanning-tree
Function
Enables the spanning tree protocol
Configures STP, RSTP mode
Configures the spanning tree bridge forward time
Configures the spanning tree bridge hello time
Configures the spanning tree bridge maximum age
Configures the spanning tree bridge priority
Configures the path cost method for RSTP
Configures the transmission limit for RSTP
Configures the spanning tree path cost of an interface
Configures the spanning tree priority of an interface
Enables fast forwarding for edge ports
Sets an interface to fast forwarding
Configures the link type for RSTP
Re-checks the appropriate BPDU format
Shows spanning tree configuration for the common
spanning tree (i.e., overall bridge), a selected interface, or
an instance within the multiple spanning tree
Spanning Tree Commands
Mode Page
GC 4-126
GC 4-126
GC 4-127
GC 4-128
GC 4-128
GC 4-129
GC 4-130
GC 4-130
IC 4-131
IC 4-132
IC 4-132
IC 4-133
IC 4-134
PE 4-135
PE 4-135
4-125