Accton Technology VS4512DC Management Manual page 196

Command Line Interface
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config command to
compare the information in running memory to the information stored in
non-volatile memory.
• This command displays settings for key command modes. Each mode group is
separated by "!" symbols, and includes the configuration mode command, and
corresponding commands. This command displays the following information:
• SNMP community strings
• Users (names and access levels)
• VLAN database (VLAN ID, name and state)
• VLAN configuration settings for each interface
• Multiple spanning tree instances (name and interfaces)
• IP address configured for VLANs
• Routing protocol configuration settings
• Spanning tree settings
• Any configured settings for the console port and Telnet
4-50