Table of Contents
Advertisement
Command Line Interface
Example
Console(config)#vlan database
Console(config-vlan)#
Related Commands
show vlan (4-143)
vlan
This command configures a VLAN. Use the no form to restore the default settings or
delete a VLAN.
Syntax
vlan vlan-id [name vlan-name] media ethernet [state {active | suspend}]
no vlan vlan-id [name | state]
•
vlan-id - ID of configured VLAN. (Range: 1-4093, no leading zeroes)
•
name - Keyword to be followed by the VLAN name.
vlan-name - ASCII string from 1 to 32 characters.
•
media ethernet - Ethernet media type.
•
state - Keyword to be followed by the VLAN state.
- active - VLAN is operational.
- suspend - VLAN is suspended. Suspended VLANs do not pass packets.
Default Setting
By default only VLAN 1 exists and is active.
Command Mode
VLAN Database Configuration
Command Usage
• no vlan vlan-id deletes the VLAN.
• no vlan vlan-id name removes the VLAN name.
• no vlan vlan-id state returns the VLAN to the default state (i.e., active).
• You can configure up to 255 VLANs on the switch.
Example
The following example adds a VLAN, using VLAN ID 105 and name RD5. The VLAN
is activated by default.
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Console(config-vlan)#
Related Commands
show vlan (4-143)
4-138
Advertisement
Table of Contents
