Time Commands; Sntp Client - Accton Technology VS4512DC Management Manual

Command Line Interface
Example
Console#show logging sendmail
SMTP servers
-----------------------------------------------
192.168.1.19
SMTP minimum severity level: 7
SMTP destination email addresses
-----------------------------------------------
ted@this-company.com
SMTP source email address: bill@this-company.com
SMTP status: Enable
Console#

Time Commands

The system clock can be dynamically set by polling a set of specified time servers
(NTP or SNTP), or by using information broadcast by local time servers.
Command

sntp client

sntp server
sntp poll
sntp broadcast client
show sntp
clock timezone
calendar set
show calendar
sntp client
This command enables SNTP client requests for time synchronization from NTP or
SNTP time servers specified with the sntp servers command. Use the no form to
disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
4-44
Accepts time from specified time servers
Specifies one or more time servers
Sets the interval at which the client polls for time
Accepts time from any time broadcast server
Shows current SNTP configuration settings
Sets the time zone for the switch's internal clock
Sets the system date and time
Displays the current date and time setting
Function Mode Pag
e
GC 4-44
GC 4-45
GC 4-46
GC 4-47
NE, PE 4-47
GC 4-48
PE 4-48
NE, PE 4-49