Dir; Default Setting; Command Mode - Accton Technology VS4512DC Management Manual

Command Line Interface

dir

This command displays a list of files in flash memory.
Syntax
dir [boot-rom | config | opcode [:filename]]
The type of file or image to display includes:
• boot-rom - Boot ROM (or diagnostic) image file.
• config - Switch configuration file.
• opcode - Run-time operation code image file.
• filename - Name of the file or image. If this file exists but contains errors,
information on this file cannot be shown.

Default Setting

None

Command Mode

Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir
-------------------------------- -------------- ------- -----------
Factory_Default_Config.cfg
-------------------------------------------------------------------
Console#
4-58
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
file name file type startup size (byte)
diag_0060 Boot-Rom image
run_01642 Operation Code
run_0200 Operation Code
Config File
startup Config File
Description
Y
N
Y
N
Y
Total free space:
111360
1074304
1083008
2574
2710
0