Configuring the Switch
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interface via Telnet.)
CLI – Specify the hostname, location and contact information.
Console(config)#hostname VS-4512
Console(config)#snmp-server location R&D
Console(config)#snmp-server contact Geoff
Console(config)#exit
Console#show system
System description: VS-4512
System OID string: 1.3.6.1.4.1.259.6.13.4
System information
System Up time: 0 days, 6 hours, 7 minutes, and 9.51 seconds
System Name
System Location
System Contact
MAC address
Web server
Web server port
Web secure server
Web secure server port : 443
Telnet server
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Test.....................PASS
PCI Device
Test............PASS
Firmware DownloadPASS
Switch Int Loopback test.....PASS
Done All Pass.logy change notification.
Console#
3-8
: VS-4512
: R&D
: Geoff
: 00-01-00-02-00-03
: enable
: 80
: enable
: enable
4-23
4-77
4-77
4-53