Accton Technology VS4512DC Management Manual page 198

Command Line Interface
Command Usage
• Use this command in conjunction with the show startup-config command to
compare the information in running memory to the information stored in
non-volatile memory.
• This command displays settings for key command modes. Each mode group is
separated by "!" symbols, and includes the configuration mode command, and
corresponding commands. This command displays the following information:
• SNMP community strings
• Users (names, access levels, and encrypted passwords)
• VLAN database (VLAN ID, name and state)
• VLAN configuration settings for each interface
• Multiple spanning tree instances (name and interfaces)
• IP address configured for VLANs
• Spanning tree settings
• Any configured settings for the console port and Telnet
Example
Console#show running-config
building running-config, please wait.....
!
!
snmp-server community private rw
snmp-server community public ro
!
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
vlan database
vlan 1 name DefaultVlan media ethernet state active
!
!
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
queue cos-map 0 0 1 2
queue cos-map 1 3 4
queue cos-map 2 5 7
efm pbo
.
.
interface vlan 1
ip address 192.168.1.33 255.255.255.0
!
!
spanning-tree mode rstp
!
ip igmp snooping version 1
!
!
no map ip precedence
no map ip dscp
queue bandwidth 1 3 5 7
!
!
line console
!
line vty
!
end
Console#
4-52