Example
This example restricts management access to the indicated addresses.
Console(config)#management all-client 192.168.1.19
Console(config)#management all-client 192.168.1.25 192.168.1.30
Console#
show management
This command displays the client IP addresses that are allowed management
access to the switch through various protocols.
Syntax
show management {all-client | http-client | snmp-client | telnet-client}
•
all-client - Adds IP address(es) to the SNMP, Web and Telnet groups.
•
http-client - Adds IP address(es) to the Web group.
•
snmp-client - Adds IP address(es) to the SNMP group.
•
telnet-client - Adds IP address(es) to the Telnet group.
Command Mode
Global Configuration
Example
Console#show management all-client
Management Ip Filter
Http-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Snmp-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Telnet-Client:
Start ip address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30
End ip address
192.168.1.19
192.168.1.30
System Management Commands
4-27