Configuring Private Vlans; Pvlan - Accton Technology VS4512DC Management Manual

Command Line Interface
Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for VLAN 1:
Console#show vlan id 1
VLAN Type Name
---- ------- ---------------- --------- ----------------------------------
1 Static
Console#

Configuring Private VLANs

pvlan

Use this command in global configuration mode to enable or configure private
VLAN. Use the no form of this command to disable it.
Command
pvlan
pvlan up-link down-link
show pvlan
Syntax
pvlan
pvlan up-link interface-list down-link interface-list
no pvlan
• up-link – Specifies a list of uplink interfaces.
• down-link – Specifies a list of downlink interfaces.
Default Setting
No pvlan
Command Mode
Global configuration
4-144
Status
DefaultVlan Active Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/ 5
Enables Private VLAN globally for the switch
Configures uplink and downlink ports
shows the private VLAN configuration settings on this
switch
Ports/Channel groups
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth1/10
Eth1/11 Eth1/12 Eth1/13 Eth1/14 Eth1/15
Eth1/16 Eth1/17 Eth1/18 Eth1/19 Eth1/20
Eth1/21 Eth1/22 Eth1/23 Eth1/24
Function Mode Pag
e
GC 4-144
GC 4-144
PE 4-145