Accton Technology VS4512DC Management Manual page 282

Command Line Interface
Command Usage
• Use the show spanning-tree command with no parameters to display the
spanning tree configuration for the switch and for every interface in the tree.
• Use the show spanning-tree interface command to display the spanning tree
configuration for an interface.
• For a description of the items displayed under "Spanning-tree information," see
"Configuring Global Settings" on page 3-79. For a description of the items
displayed for specific interfaces, see "Displaying Interface Settings" on
page 3-81.
Example
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode
Spanning tree enable/disable
Priority
Bridge Hello Time (sec.)
Bridge Max Age (sec.)
Bridge Forward Delay (sec.)
Root Hello Time (sec.)
Root Max Age (sec.)
Root Forward Delay (sec.)
Designated Root
Current root port
Current root cost
Number of topology changes
Last topology changes time (sec.):18131
Transmission limit
Path Cost Method
---------------------------------------------------------------
Eth 1/ 1 information
---------------------------------------------------------------
Admin status
Role
State
Path cost
Priority
Designated cost
Designated port
Designated root
Designated bridge
Fast forwarding
Forward transitions
Admin edge port
Oper edge port
Admin Link type
Oper Link type
. .
.
Console#
4-136
:RSTP
:enable
:32768
:2
:20
:15
:2
:20
:15
:32768.000087654321
:1
:200000
:1
:3
:long
: enable
: root
: forwarding
: 100000
: 128
: 200000
: 128.24
: 32768.0.0000ABCD0000
: 32768.0.0030F1552000
: disable
: 1
: enable
: disable
: auto
: point-to-point