Vdsl Commands - Accton Technology VS4512DC Management Manual

VDSL Commands

These commands are used to to configure and display communication parameters
for VDSL and Ethernet ports on the switch and connected CPEs.
Command
efm profile global
efm profile
efm reset
efm shutdown
efm rdl
efm interleave
efm noise-margin
efm rate-adapt
efm pbo
show controllers
ethernet-controller
show controllers efm
actual
show controllers efm
admin
show controllers efm
profile
show controllers efm
status
show controllers efm
remote ethernet mode
show controllers
efm-noise-margin
show controllers efm
channel-performance
show controllers efm
line-table
show controllers efm
phy-table
show controllers efm
channel-table
show controllers efm
current-performance
Batch assigns profiles for speed to all the VDSL ports on the
switch
Assigns profiles for speed to individual VDSL ports
Resets the switch VDSL chipset or, if a CPE is connected, the
CPE VDSL chipset
Disables the VDSL chipset transmitter of an EFM port that is not
being used
Enables/disables Remote Digital Loopback (RDL) mode
Sets the interleave parameters for the selected port
Sets the noise margin of the selected VDSL port
Enables and disables the rate adaption feature on the selected
VDSL port
Enables and disables power back-off on the selected VDSL port IC
Displays the Ethernet link transmit and receive statistics on a
specific VDSL port.
Displays the current values of the VDSL link on a specific VDSL
port.
Displays the administrative settings of the VDSL link on a specific
VDSL port
Displays information about the Ethernet in the First Mile (EFM)
profiles available on the switch, and how they are assigned to the
VDSL ports
Displays the VDSL link statistics and profile information on a
specific VDSL port
Displays the connected CPE Ethernet mode
Displays the noise margin for the switch's VDSL ports
Displays the channel performance for the channels in a VDSL
line
Displays the channel performance for the channels in a VDSL
line
Displays physical interfaces information for the selected VDSL
port
Displays channel interface information for the selected VDSL port PE
Displays line and channel performance data information during
the current 15 minute interval, and during the current day.
Function
VDSL Commands
Mod Page
e
GC 4-102
IC 4-103
IC 4-104
PE 4-104
IC 4-105
IC 4-106
IC 4-107
IC 4-108
4-109
PE 4-109
PE 4-111
PE 4-112
PE 4-112
PE 4-114
PE 4-115
PE 4-116
PE 4-117
PE 4-117
PE 4-118
4-119
PE 4-120
4-101