Accton Technology VS4512DC Management Manual page 36

Configuring the Switch
Menu
VLAN
802.1Q VLAN
Basic Information
Current Table
Static List
Static Table
Static Membership
Port Configuration
Trunk Configuration
Private VLAN
Private VLAN Status
Private VLAN Link Status
Priority
Default Port Priority
Default Trunk Priority
Traffic Classes
Traffic Classes Status
Queue Mode
Queue Scheduling
IP Precedence/
DSCP Priority Status
IP Precedence Priority
IP DSCP Priority
IP Port Priority Status
IP Port Priority
Copy Settings
3-6
Description
Displays information on the VLAN type supported by this switch
Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
Used to create or remove VLAN groups
Modifies the settings for an existing VLAN
Configures membership type for interfaces, including tagged,
untagged or forbidden
Specifies default PVID and VLAN attributes
Specifies default trunk VID and VLAN attributes
Enables or disables the Private VLAN feature
Configures ports as downlink or uplink ports. Traffic from
downlink ports can only be forwarded to, and from, the uplink
ports
Sets the default priority for each port
Sets the default priority for each trunk
Maps IEEE 802.1p priority tags to output queues
Enables/disables traffic class priorities (not implemented)
Sets queue mode to strict priority or Weighted Round-Robin
Configures Weighted Round Robin queueing
Globally selects IP Precedence or DSCP Priority, or disables
both.
Sets IP Type of Service priority, mapping the precedence tag to
a class-of-service value
Sets IP Differentiated Services Code Point priority, mapping a
DSCP tag to a class-of-service value
Enables/disables Port Priority status
Maps IP ports (TCP/UDP ports) to the switch's 4 traffic class
queues
Allows you to copy the priority settings from a selected port or
trunk to another selected port or trunk
Page
3-86
3-86
3-88
3-89
3-91
3-92
3-93
3-94
3-94
3-96
3-97
3-97
3-98
3-98
3-98
3-100
NA
3-101
3-102
3-103
3-104
3-105
3-107
3-107
3-108