Table of Contents
Advertisement
show controllers efm channel-performance
This command displays the channel performance for the channels in a VDSL line.
For details see "Displaying VDSL Interface Information" on page 3-66.
Syntax
show controllers efm channel-performance {vtu-r | vtu-c} [fast | slow]
[interface] {15-minutes | 1-day}
•
vtu-r – VTU (VDSL Transceiver Unit) at the remote end of the line
•
vtu-r – VTU Transceiver at the near (central) end of the line
•
fast – Fast channel
•
slow – Slow channel
•
interface – Ethernet interface to display
• unit/port
- unit - This is device 1
- port - Port number
•
15-minutes – Performance at intervals of 15 minutes
•
1-day – Performance at intervals of 1 day
Command Mode
Privileged EXEC
Example
Console#show controllers efm channel-performance vtu-c fast 1/1 1-day
VDSL_CHAN_1DAY_INTERVAL_ENTRY :
Ethernet 1/1
Ethernet 1/1
Ethernet 1/1
Console#
Related Commands
show controllers efm actual (4-111)
show controllers efm admin (4-112)
show controllers efm status (4-114)
show controllers efm line-table
This command displays the channel performance for the channels in a VDSL line.
For details see "Displaying VDSL Interface Information" on page 3-66.
Syntax
show controllers efm line-table
Command Mode
Privileged EXEC
Channel Interval Number at interval 1 day
Channel Interval monitoring at interval 1 day
Channel Interval Bad Blocks at interval 1 day
VDSL Commands
0
0
0
4-117
Advertisement
Table of Contents
