Flash/File Commands; Copy - Accton Technology VS4512DC Management Manual

Flash/File Commands

These commands are used to manage the system code or configuration files.
Command

copy

Copies a code image or a switch configuration to or from flash
memory or a TFTP server
delete Deletes a file or code image
dir Displays a list of files in flash memory
whichboot Displays the files booted
boot system Specifies the file or image used to start up the system
copy
This command moves (upload/download) a code image or configuration file
between the switch's flash memory and a TFTP server. When you save the system
code or configuration settings to a file on a TFTP server, that file can later be
downloaded to the switch to restore system operation. The success of the file
transfer depends on the accessibility of the TFTP server and the quality of the
network connection.
Syntax
copy file {file | running-config | startup-config | tftp}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config | https-certificate}
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the current
running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
• https-certificate - Copies an HTTPS certificate from an TFTP server to the
switch.
Default Setting
None
Command Mode
Privileged Exec
Function
Flash/File Commands
Mode Page
PE 4-55
PE 4-57
PE 4-58
PE 4-59
GC 4-59
4-55