Dell 5310n - Workgroup Laser Printer B/W Service Manual page 110

Service manual
Table of Contents

Advertisement

User attendance messages—paper jams and paper handling errors (2xx.xx)
Error
Sub
Description
code
codes
236
00
Paper did not leave the
duplex exit sensor.
237
.00
Paper did not reach the
printer input sensor from
the duplex unit.
237
.07
Duplex paper jam.
There may be other
jams in the paper path.
238
.00
Paper is covering one of
the duplex sensors
during a reset.
238
.01
Duplex input sensor
covered.
Service Manual
2-68
Possible causes
• Duplex jam access tray is not fully
latched.
• Printer PTO not driving duplex feed
rolls.
• Duplex feed system not working
correctly.
• Duplex jam access tray is not fully
latched.
• Printer PTO not driving the duplex
feed folls.Duplex feed system not
working correctly.
• Duplex jam access tray is not fully
latched.
• Printer PTO not driving duplex feed
rolls.
• Duplex feed system not working
correctly.
• Media left in the duplex and Continue
selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and Continue
selected.
• Sensor is having mechanical or
electrical problems.
Action
• Make sure the duplex jam
access tray is installed
correctly
• Make sure the power takeoff
shaft and spring are
correctly installed and
operating properly.
• Try the duplex option again.
If it fails try another duplex
option, if available. If
another one is not available,
replace the duplex option.
• Make sure the duplex jam
access tray is installed
correctly
• Make sure the power takeoff
shaft and spring are
correctly installed and
operating properly.
• Try the duplex option again.
If it fails try another duplex
option, if available. If
another one is not available,
replace the duplex option.
• Make sure the duplex jam
access tray is installed
correctly
• Make sure the power takeoff
shaft and spring are
correctly installed and
operating properly.
• Try the duplex option again.
If it fails try another duplex
option, if available. If
another one is not available,
replace the duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents