Installing An Option Card - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Service manual
Table of Contents

Advertisement

Installing an option card

The printer has two connectors that support the following option cards:
Hard disk with adapter card
MarkNet N8000 series internal print server
RS-232 Serial Interface Card
Parallel 1284-B Interface Card
Coax/Twinax Adapter for SCS
Warning: Option cards are easily damaged by static electricity. Touch something metal such as the printer
frame before you touch an option card.
Locate the card connectors on the system board.
1.
Remove the screw (A) and the cover plate (B), and save them.
2.
If you are installing a tall card, install it in connector 1. If you are installing two short cards on a model with
multiple connectors, use connector 1 first, and then use connector 2.
Unpack the card. Save the packaging materials.
3.
Align the connection points on the card with the connector on the system board, and push the card firmly
4.
into the system board connector.
Insert the screw saved from the cover plate (or the extra screw shipped with the card).
5.
Tighten the screw to secure the card.
6.
Service Manual
A-10
A
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents