Printhead Removal - Dell 5310n - Workgroup Laser Printer B/W Service Manual

Printhead removal

CAUTION: The laser scanning unit is not a serviceable FRU. Replace the entire unit when service is required.
Remove the laser cover. See
1.
Disconnect the printhead cable (A) from the printhead assembly.
2.
Remove the three printhead mounting screws (B), and remove the printhead.
3.
Note: Do the
"Printhead assembly adjustment" on page 4-2
assembly or loosen the mounting screws.
Service Manual
4-74
"Laser cover removal" on page 4-20.
whenever you remove or replace the printhead