Dell 5310n - Workgroup Laser Printer B/W Service Manual page 423

Service manual
Table of Contents

Advertisement

Print defects guide
Match a set of repeating defects on a print job to the marks on one of the vertical lines. The line that best
matches the defects on the print job indicates which particular part may be causing the defect.
For example, the distance between these two marks represents
a repeating defect that occurs every 28.3 mm (1.11 in.), which
means the charge rollers may need to be replaced.
Replace the
transfer roller
Replace the
charge rollers
28.3 mm
(1.11 in.)
Note: If the defect appears on the printed side of a single-sided print
Replace the toner cartridge
47.8 mm
(1.88 in.)
51.7 mm
(2.04 in.)
job, replace the toner cartridge before replacing the fuser.
96.8 mm
(3.81 in.)
Print defects guide
Page 1 of 1
Replace the fuser
95.2 mm
88.0 mm
(3.75 in.)
(3.46 in.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

5210n5310n

Table of Contents